MICRO RONI CAA for Glock Modification

Micro Roni has developed a revolutionary product line of accessories known as CAA which stands for Certified Accuracy Accessories. These are a series of accessories designed to improve trigger control, reduce perceived felt recoil and increase accuracy for Glocks. 

These micro Roni products are made from highly durable materials that are not only lightweight but also offer an incredible feel when engaging targets. The design of the grip frame allows users to customize their firearm without having to permanently modify it.

The MICRO RONI CAA is a universal accessory for most models of pistols including the 1911A22, M1911, S&W Model 10, 9mm, and other popular handguns. All models can be easily installed in less than 30 minutes.

How to Cut a Magazine Carrier

If you're looking for a magazine carrier that is easy to use, then the Glock magazine carrier might be a perfect choice. This article will show you how to modify your own magazine carriers to fit any of your Glocks.

You can easily make these magazines yourself using an ordinary glue gun. You'll need two pieces of wood with holes drilled through them. The first piece should have a hole at each end and another one in the middle. Then, you'll want to cut the second piece so that it fits inside of the first one. After this, just apply some hot glue to the edges and attach it to the back side of the magazine.

You can also buy a ready-made magazine holder from a local sporting goods store. If you do decide to purchase a prebuilt magazine carrier, then you should consider the size that you prefer. There are many different sizes available, including small, medium, large, and extra-large.

How to Cut a Magazine Spring

Spring is a very important part of a gun. If you're looking to modify your Glock magazine spring, you need to make sure that you do it correctly. Otherwise, you could end up damaging the firearm.

To get started, all you have to do is remove the magazine from the frame. Then, you should take the spring apart so that you can examine each individual component. Once you've done this, you'll be able to figure out how to cut a new one.

When you first start cutting the spring, you should use an angle grinder. This tool will allow you to quickly and easily slice through the material.

Once you’ve finished cutting the spring, you can install it back into the magazine. You may want to put some tape over the hole that you just created.

How to Cut a Trigger Guard

It's no secret that micro roni glock have been modified by many different people. Some of these modifications include adding a slide lock safety, removing the trigger guard, changing the grip angle, etc. One of the most popular modifications is the addition of a trigger guard.

If you're looking to modify your own pistol, here are some tips for doing so. First of all, you should know how to cut a trigger guard. Once you've done this, you can take it from there.

You need to start with an empty gun. You'll want to remove the magazine and the slide assembly.

Next, you can use a cutting tool to make a straight line across the top of the frame. This will help you to create a clean edge for your cut.

Once you've made the first cut, you can continue on until you reach the end. At this point, you should be able to get your desired length.